CG-6型重力仪零漂特性研究     

郝洪涛  刘少明  韦进  胡敏章 《大地测量与地球动力学》2019,39(10):1086-1090

对中国地震局地震研究所最新引进的4台CG-6型相对重力仪的零漂特性进行测试研究，结果表明，4台重力仪的静态零漂率、混合零漂率和动态零漂率均小于8 μGal/h，满足厂家给出的技术指标。在较长观测时间内，各台仪器的零漂均存在不同程度的非线性特征，因此在进行较长时间的野外观测以及后续数据处理中，不宜将零漂率作为常数进行解算和零漂改正。  相似文献   

基于重力测点和段差变化的前郭5.8级震群研究与三维反演     

王同庆  张品  刘金钊  陈兆辉  张双喜  朱传东 《大地测量与地球动力学》2019,39(5):469-475

利用东北地区近几年流动重力观测数据，分析前郭5.8级震群周边重力点值的时序变化特征，并基于重力段差变化对东北地区整体和局部重力变化引入能够反映异常显著性程度的指标量G和C值，最后对前郭5.8级震群前的重力场动态变化作三维密度反演。结果表明：1）前郭5.8级震群发震构造两侧的局部重力变化具有较明显的差异性，其变化趋势可作为识别构造活化或解耦运动的标志；2）显著性指标量G和C值能够为地震重力前兆的定量描述提供新思路；3）震前重力变化的反演结果显示地震发生在质量运移的过渡区域，垂向反演结果对本次地震的震源深度有一定的揭示意义。  相似文献   

2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析     

高丽娟  邢喜民  高歌  李尚伟 《大地测量与地球动力学》2019,39(10):1002-1006

2017年精河M_S6.6地震震前，尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化，经现场落实确认，异常是可靠的。根据这3个台的记录资料计算相对应变的变化，结果表明，地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现，相对应变场异常期间主方向与震源机制解P轴方位较为一致。  相似文献   

西准噶尔红山地区晚古生代赞岐岩锆石U Pb年代学、地球化学特征及其地质意义   总被引：1，自引：0，他引：1  

马飞宙  陈宣华  徐盛林  马芬  韩乐乐  丁伟翠  王叶 《地质学报》2020,94(5):1462-1481

中亚造山带西部西准噶尔地区红山花岗岩体内部发育多期似岩墙状安山质暗色条带,LA-ICP-MS锆石U-Pb同位素定年和岩石化学与同位素分析表明,它们具有不同的形成年龄、相同的源区和相似的形成过程。其中,具有不规则状或环状形态的暗色条带,其锆石U-Pb年龄为319.1±2.9 Ma和313.3±2.4 Ma,远大于红山岩体花岗岩锆石结晶年龄(305～301Ma),可能是红山岩体侵位过程中所捕掳的围岩;具有线性展布特征的安山质暗色条带,其锆石U-Pb年龄为295±2Ma,形成于红山岩体侵位之后,构成伸展岩墙群。红山岩体中的安山质暗色条带和线状岩墙群具有相似的岩石化学组成,富SiO_2(56.48%～63.09%)、MgO(3.56%～6.31%),具有高的Mg#值(51.74～62.40)及Na_2O/K_2O值(1.34～3.43);球粒陨石标准化稀土元素(REE)配分模式呈明显的右倾型,富集轻稀土元素(LREE)和大离子亲石元素(LILE)Rb、K、Ba、U、Sr,亏损高场强元素(HFSE)Th、Nb、Ce、P和重稀土元素,具较弱的负铕异常;其同位素组成特征为(~(87 )Sr/~(86 )Sr)i=0.703295～0.703620,(~(143) Nd/~(144) Nd)i=0.512612～0.512618,εNd(t)=6.91～7.62,(~(206) Pb/~(204) Pb)t为17.6883～17.9876,(~(207) Pb/~(204) Pb)t为15.5313～15.5686,(~(208)Pb/~(204)Pb)t为37.4460～38.0581。它们具有与赞岐岩类似的地球化学特征,总体表现出与弧岩浆作用相关的地球化学特征,可能具有共同的物质来源,为准噶尔洋板片俯冲消减后同一地幔源区在不同阶段的产物。其中,形成于弧岩浆作用时期的赞岐岩(319～313 Ma),构成与岛弧花岗岩类伴生的环状似岩墙状安山质暗色条带;形成于后造山伸展岩浆作用晚期的赞岐岩(～295Ma),构成与达拉布特左行走滑作用相关的陆内伸展岩墙群。安山质暗色条带(岛弧火山作用)、红山岩体(后造山伸展)和线状岩墙群(陆内伸展)记录了西准噶尔红山地区洋陆转换的全过程。  相似文献   

大地水准面高的计算及其在海底地形反演中的应用     

范雕  李姗姗  苏明晓  孟书宇  邢志斌  张驰  冯进凯 《海洋技术学报》2019,38(5)

为充分挖掘海洋重力数据在反演海底地形中的应用潜力,尝试探索利用大地水准面高反演海底地形的技术途径,并以夏威夷—皇帝海山链拐点所在海区作为反演试验区进行验证。首先采用Belikov列推法计算伴随(缔和)勒让德函数,利用EIGEN-6C4地球重力场模型解算获取了分辨率为1'的大地水准面高格网数值模型;然后通过综合分析反演比例函数和转换函数特点、研究海区大地水准面高与海底地形的相干特性以及大地水准面高本身尺度特征,获得了利用大地水准面高反演海底地形的频段范围;最终以试验海区大地水准面高为数据输入,构建了相应的海底地形模型(BNT模型),并与ETOPO1等海深模型进行比对分析。试验结果表明:BNT模型检核差值在一倍均方差范围检核点数量占比70.60%,相比正态分布更加集中;BNT模型检核精度低于ETOPO1等海深模型;海深模型检核精度随着水深增加不断提升,水深小于1 000 m时,海深模型相对误差出现较大发散现象;计算海域ETOPO1模型精度最高,GEBCO模型和DTU10模型检核精度相当。  相似文献   

A Revisited Purification of Li for ‘Na Breakthrough’ and its Isotopic Determination by MC‐ICP‐MS     

Lin Xu  Chongguang Luo  Hanjie Wen 《Geostandards and Geoanalytical Research》2020,44(1):201-214

The accurate and precise determination of Li isotopic composition by MC‐ICP‐MS suffers from the poor performance of traditional column chromatography. Previously established chromatographic processes cannot completely remove Na in complex geological samples, which is currently interpreted to be a result of Na breakthrough. In this study, Na breakthrough during single‐column purification was found to differ between simply artificial Na‐containing sample solutions, where a little Na residue was found, and silicate rocks, where a large amount of breakthrough occurred. A revised two‐step column purification for Li using 0.5 and 0.3 mol l^?1 HCl as eluents was designed to remove the Na. This modified method achieves high‐efficiency Li purification from Na and consequently avoiding high Na/Li ratio interference for subsequent MC‐ICP‐MS analyses. The proposed method was validated by the analysis of a series of reference materials, including Li₂CO₃ (IRMM‐016, ‐0.10‰), basalt (BCR‐2: 2.68‰; BHVO‐2: 4.39‰), andesite (AGV‐2: 6.46‰; RGM‐2: 2.59‰), granodiorite (GSP‐2: ?0.87‰) and seawater (CASS‐5, 30.88‰). This work reports early Na appearance prior to the elution curves in chromatography and emphasises its influence for subsequent Li isotope measurement. Based on the findings, the established two‐step method would be more secure than single‐column chemistry for Li purification.  相似文献   

高分六号遥感卫星新增波段下的树种分类精度分析     

张沁雨  李哲  夏朝宗  陈健  彭道黎 《地球信息科学学报》2019,21(10):1619-1628

高分六号卫星具有覆盖广、多种分辨率、波段多的优势,能为遥感解译提供更丰富的信息。为探究高分六号卫星新增波段在森林树种识别上的应用,本文以覆盖根河市阿龙山林业局的一期高分六号宽幅影像为数据源,基于特征优化空间算法（Feature Space Optimization,FSO）和最大似然分类法,分别利用高分六号的前4个波段和所有波段（8波段）的光谱、纹理等特征进行了森林树种分类,并逐一添加新增波段特征确定了各波段的贡献率排名。结果表明：在加入了优选出的均匀性纹理、均值纹理和角二阶矩纹理3种纹理特征后,前4波段和8波段的分类精度比只基于光谱特征时的精度分别高出13.23%和24.63%;利用8波段信息比只利用前4波段在基于光谱特征上的精度高11.88%,在基于光谱+纹理特征上则高23.24%;基于8波段光谱+纹理特征的树种分类精度最高,达到68.74%,新增4波段的贡献率排名为B6>B5>B8>B7,说明新增红边波段对于本次树种分类试验的贡献率最高,能为北方树种识别提供有效帮助。  相似文献   

Simulation and projection of climate change using CMIP6 Muti-models in the Belt and Road Region     

YanRan Lü  Tong Jiang  YanJun Wang  BuDa Su  JinLong Huang  Hui Tao 《寒旱区科学》2020,12(6):389-403

Climate condition over a region is mostly determined by the changes in precipitation, temperature and evaporation as the key climate variables. The countries belong to the Belt and Road region are subjected to face strong changes in future climate. In this paper, we used five global climate models from the latest Sixth Phase of Coupled Model Intercomparison Project (CMIP6) to evaluate future climate changes under seven combined scenarios of the Shared Socioeconomic Pathways and the Representative Concentration Pathways (SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, SSP4-3.4, SSP4-6.0 and SSP5-8.5) across the Belt and Road region. This study focuses on undertaking a climate change assessment in terms of future changes in precipitation, air temperature and actual evaporation for the three distinct periods as near-term period (2021-2040), mid-term period (2041-2060) and long-term period (2081-2100). To discern spatial structure, K?ppen-Geiger Climate Classification method has been used in this study. In relative terms, the results indicate an evidence of increasing tendency in all the studied variables, where significant changes are anticipated mostly in the long-term period. In addition to, though it is projected to increase under all the SSP-RCP scenarios, greater increases will be happened under higher emission scenarios (SSP5-8.5 and SSP3-7.0). For temperature, robust increases in annual mean temperature is found to be 5.2 °C under SSP3-7.0, and highest 7.0 °C under SSP5-8.5 scenario relative to present day. The northern part especially Cold and Polar region will be even more warmer (+6.1 °C) in the long-term (2081-2100) period under SSP5-8.5. Similarly, at the end of the twenty-first century, annual mean precipitation is inclined to increase largely with a rate of 2.1% and 2.8% per decade under SSP3-7.0 and SSP5-8.5 respectively. Spatial distribution demonstrates that the largest precipitation increases are to be pronounced in the Polar and Arid regions. Precipitation is projected to increase with response to increasing warming most of the regions. Finally, the actual evaporation is projected to increase significantly with rate of 20.3% under SSP3-7.0 and greatest 27.0% for SSP5-8.5 by the end of the century. It is important to note that the changes in evaporation respond to global mean temperature rise consistently in terms of similar spatial pattern for all the scenarios where stronger increase found in the Cold and Polar regions. The increase in precipitation is overruled by enhanced evaporation over the region. However, this study reveals that the CMIP6 models can simulate temperature better than precipitation over the Belt and Road region. Findings of this study could be the reliable basis for initiating policies against further climate induced impacts in the regional scale.  相似文献   

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating     

Hideki Iwano  Tohru Danhara  Takashi Yuguchi  Takafumi Hirata  Masatsugu Ogasawara 《地学学报》2019,31(3):247-256

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.  相似文献   

Copper Isotopic Analysis in Geological and Biological Reference Materials by MC‐ICP‐MS     

Kaj Sullivan  Daniel Layton‐Matthews  Matthew Leybourne  James Kidder  Zoltn Mester  Lu Yang 《Geostandards and Geoanalytical Research》2020,44(2):349-362

The characterisation of relative copper isotope amount ratios (δ⁶⁵Cu) helps constrain a variety of geochemical processes occurring in the geosphere, biosphere and hydrosphere. The accurate and precise determination of δ⁶⁵Cu in matrix reference materials is crucial in the effort to validate measurement methods. With the goal of expanding the number and variety of available geological and biological materials, we have characterised the δ⁶⁵Cu values of ten reference materials by MC‐ICP‐MS using C‐SSBIN model for mass bias correction. SGR‐1b (Green River shale), DOLT‐5 (dogfish liver), DORM‐4 (fish protein), TORT‐3 (lobster hepatopancreas), MESS‐4 (marine sediment) and PACS‐3 (marine sediment) have for the first time been characterised for δ⁶⁵Cu. Additionally, four reference materials (with published δ⁶⁵Cu values) have been characterised: BHVO‐1 (Hawaiian basalt), BIR‐1 (Icelandic basalt), W‐2a (diabase) and Seronorm? Trace Elements Serum L‐1 (human serum). The reference materials measured in this study possess complex and varied matrices with copper mass fractions ranging from 1.2 µg g^?1 to 497 µg g^?1 and δ⁶⁵Cu values ranging from ?0.20‰ to 0.52‰ with a mean expanded uncertainty of ± 0.07‰ (U, k = 2), covering much of the natural copper isotope variability observed in the environment.  相似文献